I have inserted a SIP-800 card into my CRS-8. I inserted the SPA into the SIP. I cannot find how I configure the SIP or the SPA. I have spent the day reading the manual but no where do I see the commands to activate or get the SIP up and running...
I have inserted a SIP-800 card into my CRS-8. I inserted the SPA into the SIP. I cannot find how I configure the SIP or the SPA. I have spent the day reading the manual but no where do I see the commands to activate or get the SIP up and running...
I have inserted a SIP-800 card into my CRS-8. I inserted the SPA into the SIP. I cannot find how I configure the SIP or the SPA. I have spent the day reading the manual but no where do I see the commands to activate or get the SIP up and running...
I have an ML-MR 10 card. I cannot figure out how to get the ONS 15454 to recognize it. I insert the card. I then the card and right click. I go to Ethernet and there is not an ML-MR Card. There is a ML1000 and an ML1000T. I really am not sure...
I am in despeate need of some assitance in connectng to my 1545. We upgraded our software and now the lights on the 1545 just blink. I do not know if I can connet to this via the rs232 connection or not. I am not sure if somehow I can get the ...
Interesting. Actually this info is a little different than what I was told. So to cut to the chase. I only need to purchase an MSC-B in order to get my SIP-800 up and running
I am about to purchase this today. One last clarification before I pull the trigger on this purchase. I only need to buy an MSC-B card to get the SIP-800 working. I do not need to buy a FP-40 card. I am not sure what the purpose of the 4 FC-14...
Ok I get it . It appears that my predecessor got us on the wrong path. The MSC cards I see are very very pricey. Not sure what other options I have though.
Ok I have looked to purchase either the MSC-B or the FP-40. They are pricey. Lets say I wasnt married to the SIP-800 card. What other configuration (cards) could I get. My goal is to be able to use any transciever in the unit
So in order for me to get the SIP-800 working I would need to get either a MSC-8 adn or FP40 cards (somewhat pricey)The current FC-140 cards serve what purpose?Lets say I am not married to the SIP-800 cards. What other options do I have to use SFP...
