About bphilli70

bphilli70 · 04-01-2010

Hello,The router is an SA 520W running firmware 1.1.21. It obtains it's Dedicated WAN address from an IPv4 DHCP server. There are no other ports connected, but there are about 5-10 wireless clients at any given moment.This might be obvious to some,...

bphilli70 · 03-28-2010

Hello,I have a Cisco SA 520W that doesn't seem to respond to two settings in the configuration. I've enabled/disabled/re-enabled various times and still no change in behavior.The first is PING on the WAN interface. I want to enable it, but the chec...

bphilli70 · 03-30-2010

Thanks.I first had automatic firmware checks enabled, and to check periodically. I eventually wanted to disable that, and unchecked the box. The web interface doesn't allow you to remove the username and password (my feeling is a button should be a...

bphilli70 · 03-30-2010

Don't know what caused it, but it was unstable last night and had to be restored to factory settings. The checkboxes are now working as one would expect them to work, and the box is responding to pings.My gut instinct is that it had to do with an ol...

bphilli70 · 03-28-2010

I do have this entry in the logs:umiIoctl (UMI_COMP_FIREWALL, UMI_CMD_DB_UPDATE(4)) failed. table=AttackChecks6 row=1but as far as I know, this is an IPv6 error. I have set the router to IPv4 only routing between WAN and LAN.

Member Since	‎03-25-2010 05:14 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

SA 520W - What is this log entry trying to tell me?

SA 520W doesn't respond to two settings

Re: SA 520W doesn't respond to two settings

Re: SA 520W doesn't respond to two settings

Re: SA 520W doesn't respond to two settings