sifurobbie
Level 1
Level 1
Member since ‎06-24-2010
‎08-18-2017

User Statistics

  • 37 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

Hello all,I have a Cisco 2960S-48LPS which was loaded with the IOS c2960s-universalk9-mz.152-1.E.bin via xmodem using Tera Term. I can see the IOS in the flash directory fine and then issue the set BOOT flash:c2960s-universalk9-mz.152-1.E command. It...
Hello Cisco Support Community,Is it possible to create an EIGRP lab using routers which have ethernet interfaces only? None of my routers have serial interfaces. Labs I've seen on the Internet use routers which use serial interfaces as well as ethern...
I have split tunneling configured on a PIX 515. The remote VPN client connects to the PIX fine and can ping hosts on the internal LAN, but cannot access the Internet. Am I missing something? My config as per below. Also, I don't see any secured route...
I have the following VPN site-2-site configuration.The trouble I'm having is host 172.168.88.3 in site A is not able to ping 172.168.200.3 in site B and visa versa. Think I have added the static routes and ACLs correctly on the 3560 switches (acting ...
Hello,I have the following setup.host PC (192.168.9.3) -----> gateway (192.168.9.2) ----- Pix E1 (192.168.9.1)/Pix E0 (81.x.x.250) ------ InternetThe 192.168.9.2 gateway is a 3560 switch connected to the PIX. I can ping out to the Internet via IP fro...
Community Statistics
Member Since ‎06-24-2010 02:28 AM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 37