we have ospf routing shutdown on the router as we no longer using it.router ospf 10router-id 10.1.0.2shutdown network 10.1.0.2 0.0.0.0 area 0network 10.2.0.6 0.0.0.0 area 0passive-interface Serial0/1/0can i just delete the config from the router wi...
Please let me know if i can change the probe settings to 40 sec instead of current valuesprobe tcp PROBE_HTTP port 161 interval 3 faildetect 2 passdetect interval 3 open 10as the servers are responding to the probes by ACE LBs ,every sec ,crea...
Had setup my ACE ,to send traps to SNMP server .but dont see any logs on the SNMP server from ACE.SNMP configuration on ACElogging enablelogging buffered 6logging host 10.12.40.12 udp/514snmp-server community public group Network-Monitorsnmp-server h...
configured my GSS to setup traps to snmp server ,but the snmp server is not receiving any traps from GSSsnmp-server enablesnmp-server community-string public rosnmp-server host 10.19.41.11 public traps version 2 udp-port 162snmp-se...
Need some help in understanding the priority value , below is my ft track host conifg and the outputft interface vlan 1003 ip address 1.1.1.1 255.255.255.252 peer ip address 1.1.1.2 255.255.255.252 no shutdownft peer 1 heartbeat interval 300 h...
Gaurav thanks for explaining me in detail ,I guess the better choice would be to track interface vlan ,which ever is configured on ACE ,that way I will be tracking same vlan ft track interface Admintrack-interface vlan 5peer track interface vlan 5p...
Gaurav thanks for your response So inthat case my config should work ,there should not be any issues.Please let me know if I need add or delete any of the priority
We configured the FT configuration of the ft interface and group on primary aceft interface vlan 1003 ip address 1.1.1.1 255.255.255.252 peer ip address 1.1.1.2 255.255.255.252 no shutdownft peer 1 heartbeat interval 300 heartbeat count 10 ft-i...
GauravThanks for the reply ,you mean I need to change my ft track interface PCI ,priority from 20 to 100 ,and also enable the preemt command on the ft groupsOn cisco docs ,its says ,when we configure FT track interface ,the ,i haven't set any peer p...
Sorry ,forgot to add couple points we are having one-arm mode ,and no SNAT enabled ,as application team want to see the client IPs .so on the backend servers we have changed the default gateway point vipso its working for all when the request is com...