hi, here is how my switches are configured, a cisco 3750 and a cisco 4506.outputs are shown.WESTERN-4506-01#show ip int bri g4/47Interface IP-Address OK? Method Status ProtocolGigabitEthernet4/47 unassigned YE...
Cisco 4506-E port configurationWESTERN-4506-01#show int g4/47GigabitEthernet4/47 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet Port, address is 0022.554c.01fe (fe) Description: Trunk to 425 MTU 1500 byt...
i left out the mac address table, didnt think it was relevant at this time.the 4506 is first, the 3750 starts after =======================boot system switch all flash:copy xmodem: flash:c3750-ipbasek9-mz-122-58.SE1.binversion 12.2service nagleno ser...
the 3750 is in an office where two vlans are, one for data and one for voice (vlan 30 and 35).i assigned the 3750 an ip address with a default gateway. the gateway points to the 4506the 4500 is the main switch in the building, we added another suite...
