Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About jwmelton3
Stats
Member since
09-27-2012
13
Posts
0
Helpful
0
Solutions
10-01-2012
i left out the mac address table, didnt think it was relevant at this
time.the 4506 is first, the 37...
09-30-2012
that now makes more sense. so do i make 4/47 a router with native vlan
30?also if i am understandind...
09-29-2012
the 3750 is in an office where two vlans are, one for data and one for
voice (vlan 30 and 35).i assi...
09-29-2012
interface GigabitEthernet4/47 description Trunk to 425 switchport trunk
encapsulation dot1q switchpo...
09-29-2012
3750 sh run interface FastEthernet1/0/1 description 425Trunk no
switchport ip address 10.30.30.2 255...
09-28-2012
hi, here is how my switches are configured, a cisco 3750 and a cisco
4506.outputs are shown.WESTERN-...
09-28-2012
thanks guys vlan 1 was keeping it from connecting. i gave it a bogus
address and now i am able to co...
09-27-2012
4/47gigabitethernet4/47 unassigned ip address ok=yes method=unset
status=up protocol=upfa1/0/1 no ac...
09-27-2012
FastEthernet1/0/1 is down, line protocol is down (notconnect)these are
actually up, i copied.
09-27-2012
3750 port 1 is blinking4506 port 47 is solid. in fact all lights on 4506
are solid and rest of netwo...
09-27-2012
FastEthernet1/0/1 is up, line protocol is up (connected) Hardware is
Fast Ethernet, address is 0021....
09-27-2012
the config i posted is the one i am using, the ports are up. i copied
that from my file. i can see t...
Public Statistics
| Date Registered | 09-27-2012 12:17 PM |
| Date Last Visited | 08-18-2017 03:54 AM |
| Total Messages Posted | 13 |
