You can look it via the bug tool :http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.plDirect link to the feature request:http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsl46782You wont be ab...

Hi Kris,Try this link:http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094700.shtmlRegards,Guru.

Hi James,If you are using split tunnel and pushing 192.168.100.x/24 network, the end user will not be able to access the remote network as 192.168.100.x is a directly connected network. If you do a full tunnel, where everything is going via the VPN t...

If you want to troubleshoot DAP, try debug dap trace and debug dap errorRegards,Guru.

Hi,You can configure Easy VPN on the router that will work as hub and spoke, through which you can send domain value to the spoke router.You need ESP (protocol 50) or UDP 4500 (NAT-T, if you are being a NAT device) and UDP 500 (isakmp) for VPN to wor...