Greetings,I have been struggling to get SSH up on management-only interface (M0/0) on an ASA 5510. It has SSH working on an outside interface, but not in M0/0.After setting up the interface, I can ping it (only after I declare it a management int...
halijenn wrote:Not too sure how you are going to connect the 2nd ISP line to your ASA because you can not have 2 default gateway configured on the ASA on 2 different interfaces. Unless you only route specific traffic towards the 2nd ISP, you wouldn't...
That's quite disappointing , but thank you for enlightening me.Ok, back to the drawing board. The goal is to have a secondary connection for access to our production ASA. Can you tell me if there is a possiblity in this situation:We also have a 2nd A...
halijenn,Thank you for responding.So in essence, there isn't a way to directly attach two seperate physical ethernet WAN connections to a 5510 - and being able to remotely SSH to both interfaces on both IP addresses?If that is the case, then I have a...
The connecting client is connecting from our office (shown as "ME" in the configuration) and the ASA is at a data center outside of the office.A bit of background into this, we were given a second ethernet drop at the data center, with a /30 IP range...