About reneten20

reneten20 · 05-14-2010

We have a UC520 connected to a AT&T SIP trunk and have a fax machine connected to one of the FXS ports. We are able to send faxes but we can't receive faxes. Here is what I have in the config file:voice translation-rule 8rule 1 /0741/ /0741/!voice ...

reneten20 · 05-20-2010

Excellent. I used this guide to configure a meet me conference using a SIP Trunk with DID numbers.

reneten20 · 05-20-2010

We took out the dial-peer voice 1 pots and the result is the same (no inbound fax). The receiving fax machine states - "no fax detected". Any other suggestions would be helpful.Thanks

reneten20 · 05-17-2010

When calling the fax number (0741) the following happens:1. The fax machine answers the call,2. The fax handshake tone begins and then immediately ends for a second,3. The fax handshake tone begins again for a 10-15 seconds then4. The fax machines is...

Member Since	‎02-18-2009 12:40 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	3

User Statistics

User Activity

UC520 Incoming Fax Problem

Re: Configuring Meet-me Conferencing using CCA 2.0

Re: UC520 Incoming Fax Problem

Re: UC520 Incoming Fax Problem