Hi all ,
This error is appeared on switch 2960 i need to know what this error ?
%ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/5: Power given, but Power Controller does not report Power Good
Hello all,
I set the dot1x and the Raduis configuration on 9300 switch to authenticat the end user and Run the Daynamic vlan for the users but the user can't connect with the raduis server ( Pulse ).
Version : 17.09.03
My Configuration :
int...
hi
this issue on VPN initiated between cisco asa and cisco rv 320 router the vpn tunnel is estableshed but this IKEV1 error appear in debud
Apr 12 21:05:43 [IKEv1]Group = DefaultL2LGroup, IP = 177.8.169.134, Session is being torn down. Reason: crypt...
Hello all,
I've added the ntp server for the vManage, vBond and vSmart, and the connection is working fine between them, but the three controllers still have the wrong time.
How to solve this issue
Hi all ,
I've added more subinterfaces over the FTD and set policy [ ANY >> ANY ], but the connection between these subnets is down.
FMC version : 7.0.0
Find the attached files to check the Configuration
Dear ,
Kindly be informed that this issue is related to some ports not all ports and the phone is directly connected to the switch
Admin-4 uptime is 15 weeks, 5 days, 18 hours, 24 minutes
System returned to ROM by power-on
System restarted at 2...
Admin-4#show cable-diagnostics tdr int gigabitEthernet 1/0/1
TDR test last run on: August 31 15:57:14
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- ------------------...
1- error from Cisco ise
Test Username : adel@internal.XXXXXX.comISE NODE : ISE1.internal.XXXXXXX.comScope : Default_ScopeInstance : ISE
Authentication Result : FAILED
Error : Identity not found; some of the domains were not available
Processing Steps...
