Check this feature out.http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx....

Yes, you can use MSDP instead.

Is portfast turned on for the ports that connect to the terminals? By default spanning tree goes thr...

In any of the wic slots you can start using VWIC-2MFT-T1, which are dual port T1 ports that can be d...

I would look at the fragmentation as the symptom of some underlying problem. Most modem OS's use Pat...

The most common approach I've seen is to use AS Prepending to make a particular site "less" preferre...

Are you 100% sure AT&T is advertising you routes. Its very common to only advertise a default route ...

See:http://www.cisco.com/en/US/tech/tk436/tk832/technologies_configuration_example09186a0080231a3e.s...

t-mplshttp://en.wikipedia.org/wiki/T-MPLSgmplshttp://www.javvin.com/protocolGMPLS.html

In my experience with SSM on dynamips, if it doesn't work at first, save your config and reboot the ...

Cool. Glad its working now. The devils always in the details.-Rob

Does the tunnel come up without a bandwidth reservation?

So without outputs from your routers its tough to troubleshoot, but here is all you need to configur...

Please see this:http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml#b...