About patrick.peuten_2

patrick.peuten_2 · 05-26-2010

Hello experts,I got a new error on my LMS 3.2 with RME 4.3.1I can´t install any of the RME Device updates.e.g. : "Installation failed for product [Resource Manager Essentials] with message : com.cisco.nm.xms.psu.packagemgmt.InstallerException: Reposi...

patrick.peuten_2 · 05-21-2010

Hallo,I scheduled a daily backup at 10:00 p.m.Now I noticed the following error on my LMS 3.2 Backup.I get two E-Mails1. Backup failed on 2010/05/20 at 22:53:27. REASON: Database rmengdb backup failed and. Check the log file for information.2.Backup ...

patrick.peuten_2 · 05-17-2010

Hello experts,I have some problems with my LMS 3.2 sice some days.Every time I want to go to NetConfig Jobs I get a error message.I attatched a screenshot with the exact error message.What I did:- Restarting the Deamon- Restarting the Server- 1. Stop...

patrick.peuten_2 · 02-25-2010

Hey experts,I have a problem with questioned devices in LMS 3.2 DFM.I changed the name of some Devices ( on Device and on DNS ) after the next Device Discovery they updated correctly their names in DCR.DFM Import is set to "auto".Now, the devices are...

patrick.peuten_2 · 02-03-2010

Hey experts,the Online Help for LMS 3.2 say "Data for Fault History remains in the DFM database for 31 days".How can I increase or reduce the amount of days the data will remain in the DFM Fault History Database?Is it possible to have only 10 Days in...

patrick.peuten_2 · 06-05-2010

Hey,you could check if there is a file named "xmlwrite.lock" in your Cisco Works folder. Don´t know the exact position, so maybe u can use the windows search for the whole CW installation folder to find that file.U can delete this file, after that, t...

patrick.peuten_2 · 05-26-2010

Hey,Switch(config)#spanning-tree portfast ? default Enable portfast by default on all access portsso that means, it enable portfast but it will not write the spanning-tree portfast command for each interface into the running or startup config.In y...

patrick.peuten_2 · 05-26-2010

Hey,thx for your answer.I will try to find someone who could open a TAC for me cause I don´t have access to it =/ .Could I copy those two files from a Server with a clean installation to my Server? That would be much easier for me.Bye,Patrick

patrick.peuten_2 · 05-26-2010

Hey Joel,here they are.Bye,Patrick

patrick.peuten_2 · 05-25-2010

Hey Joe,that´s it. An old at remained after deinstalling CW.After reinstalling CW I setup the backup again at 10 p.m., so I had two at´s on my system.ThxPatrick

Member Since	‎04-14-2009 01:41 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	35

User Statistics

User Activity

LMS 3.2 RME Device Update failed

LMS 3.2 Backup problem

LMS 3.2 NetConfig Error CFG0008: URN_NOT_FOUND

LMS 3.2 DFM questioned devices

LMS 3.2 DFM Fault History purge Job

Re: CM 5.2.1 Acquisition Problems

Re: portfast default / bpduguard default

Re: LMS 3.2 RME Device Update failed

Re: LMS 3.2 RME Device Update failed

Re: LMS 3.2 Backup problem