About billr.volz

billr.volz · 03-13-2022

I have an RV160 router. Recently I upgraded my WAN from over-the-air connection to fiber with the same ISP and in the process my public static IP address was changed. After making the IP change I noticed that all the ports that were supposed to be fo...

billr.volz · 03-22-2022

To bring this to a close. The on the port forwarding settings, the router has an option to set the interface. Choices are WAN or Any. When it's set at Any, the ports are closed. When on WAN they are open. I don't know why Cisco would have this setti...

billr.volz · 03-17-2022

I check if the port is open on site dnschecker.org using the port checker tool. If the ports are closed they are all closed. The in port forwarding, you specify a range in incoming ports that are used outside the WAN (usually a single port), an inter...

billr.volz · 03-17-2022

The only other NAT I see is enabled for WAN but no other settings so assume it's the dynamic one. The ports I'm referring are the 'service ports' in Cisco parlance, that are used in port forwarding. Ports like 443, 465, 993, 21, 22, 80and others. The...

billr.volz · 03-17-2022

I'm not sure how to post the configuration. Topology is simple. Wan plugs into the WAN port, other things plug into the LAN ports. All the settings are pretty much default. I'm still having trouble with the ports closing. The ISP swears it's not them...

billr.volz · 03-17-2022

I have no static NAT rules

Member Since	‎03-13-2022 11:29 AM
Date Last Visited	‎03-20-2022 02:59 PM
Posts	6

User Statistics

User Activity

Port open or close depending on WAN set via DHCP or static

Re: Port open or close depending on WAN set via DHCP or static

Re: Port open or close depending on WAN set via DHCP or static

Re: Port open or close depending on WAN set via DHCP or static

Re: Port open or close depending on WAN set via DHCP or static

Re: Port open or close depending on WAN set via DHCP or static