Hi,Yes it can be done by configuring vpn filters under group-policy. See config sample and explanation below:Hope this helps.http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9a87.shtml
hi,Yes, for as long as the pix has a static wan ip address, you can setup vpn site to site even if the other peer has a dynamic ip.You just need to configure the pix firewall to accept dynamic vpn connections.check the ff links:>> if you are using pi...
hi j,Check out the link for the step-by-step config guide. http://www.cisco.com/en/US/docs/security/pix/pix63/configuration/guide/sit2site.html#wp1009419For further questions let me know.
1.) DMZ to client communication:I could only see translation for 172.10.1.0 networkstatic (inside,dmz) 172.10.1.0 172.10.1.0 netmask 255.255.255.0 You also need to have translation for the 192.168.1.x network. Then do a clear xlate. 2.) DMZ server ...