About Chris_78

Chris_78 · 05-09-2019

Hi GuysWe are trying to setup our second floor with redundant Internet links as shown on the graph below. We have 2 cables from Floor 1 to Floor 2 my initial idea is to hook them and playing with STP priority ... any better ideas are greatly apprecia...

Chris_78 · 01-16-2019

Hi Guys I'm bumping my head for couple of days already - I have the topology below. My VLANs are routed through my firewalls. I'm pushing the traffic towards the firewall via PBR with tracking towards the FW interfaces and that works fine. I have ful...

Chris_78 · 01-16-2019

Hi Guys Probably a bit noobish question - how do we enable jumbo frames on Nexus 3k device. We have server VLAN and all my Windows server traffic such as DNS, DHCP SMB etc is going through there along with iSCSI traffic. We also have separated VLAN ...

Chris_78 · 11-15-2018

Hi Guys I'm trying to verify the following configuration on Nexus switches as this one is going in production tomorrow night. What always bugs me is STP currently I have SW1 and SW2 setup as follow: SW1# sh run spanning-tree spanning-tree vlan 1-1...

Chris_78 · 09-12-2018

Hi Guys Below is my topology (sorry for the noobish drawing). For some reason router B can't get any advertisements from router C. The only way to get that to work is if I redistribute the directly connected networks on router C... Both devices are ...

Chris_78 · 06-26-2019

Hi RezaQuick question - my NXOS1 and NXOS2 are VPC providers and they are connected between themselves with peer-link etc, the same is valid for my other pair of switches NXOS4 and NXOS5 are VPC providers. So can I count on STP in that scenario for t...

Chris_78 · 05-15-2019

@Reza Sharifi thanks Reza that's what I thought but i was just trying to understand Balaji @balaji.bandi I'm just going to do what you recommended - trunks and STP priorities on NXOS1 and NXOS2 - STP priority is actually already setup on these switc...

Chris_78 · 05-15-2019

@balaji.bandi Hi BalajiPlease confirm if this setup is valid!

Chris_78 · 05-14-2019

@balaji.bandi Hi BalajiIn our case we have only 2 cables and we cannot add more. Can we go VPC between the floors or we simply hook them and play with STP priorities?

Chris_78 · 05-14-2019

@balaji.bandi Hi BalajiCan you please confirm! This is the correct setup - I have only 2 cables from floor 1 to floor 2 and there is no additional connections allowed/possible between both floors.

Member Since	‎01-26-2016 08:44 AM
Date Last Visited	‎08-16-2023 12:09 AM
Posts	50
Total Helpful Votes Received	5

User Statistics

User Activity

Redundant links recommendation

OSPF leak to area 0

Jumbo frames Nexus 3k along with other traffic

Spanning tree priority with VPC recommendations NX OS

OSPF ABR not getting updated

Re: Redundant links recommendation

Re: Redundant links recommendation

Re: Redundant links recommendation

Re: Redundant links recommendation

Re: Redundant links recommendation