About stefan.tabell

stefan.tabell · 07-24-2023

Hello colleagues! For a customer running non-SDA DNA Center with automated provisioning of switches I noticed that we get Template Conflict Status under Network Profiles. In one of those I used a template that looks for switch ports that are not in T...

stefan.tabell · 12-01-2022

Hi, A customer has PLC devices that requires 10Mbit half-duplex to be configured on the switch ports. The switch ports are configured with 802.1x and MAB and the PLC gets authenticated based on MAC address in ISE. In ISE I push the radius attribute ...

stefan.tabell · 10-31-2022

Hi, For a customer with three 9800-80 (17.6.4) HA-pairs and DNA Center (2.3.3.5) we are looking for a way to have the APs join a landing controller, after which we can re-assign the AP to another WLC though DNA Center. Rather than having different op...

stefan.tabell · 06-13-2022

Hi! Looking for some help and guidance regarding how to filter down the results in an #foreach loop in a DNA Center template. My goal is to apply a calendar-profile only to a specific WLAN. I have created the following template: wireless profil...

stefan.tabell · 12-09-2021

Hi,Reaching out here and hopefully someone can help me. We have a working iPSK server that is connected to our ISE deployment.I'm currently installing new ISE PSN nodes but am getting issues with having the new nodes speaking with the iPSK portal.On ...

stefan.tabell · 07-25-2023

I flagged this under "Make a wish" from within DNAC.

stefan.tabell · 12-01-2022

Hi @mlund - The best practice from the PLC manufacturer states that switch side needs to be hardcoded. And there has been a few incidents where it didn't default to 10Half as expected.

stefan.tabell · 11-02-2022

Hi usaf! That sounds interesting! This is a non-fabric environment but would it work the same way anyway? Technically, can you explain what happens when the AP discovers DNA Center? Does DNA point the AP to a WLC or does the AP actually associate wit...

stefan.tabell · 11-02-2022

Hi usaf, the amount of APs and AP management subnets (sites) makes this impractical. We need to have the land on the same controller, and then we can use the workflow as Preston explained to get them to the correct WLC.

stefan.tabell · 08-15-2022

I had the same error and solved it by rebooting WLC. For me the WLC was still in the setup phase so no active clients to consider.

Member Since	‎01-28-2016 12:38 AM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	22

User Statistics

User Activity

DNA Center Template Conflicts

IOS-XE Smartport Macro for changing speed/duplex on 802.1x port

DNA Center and 9800 landing WLC

DNA Center - Velocity template for 9800 Policy Profile

iPSK - New ISE PSN node

Re: DNA Center Template Conflicts

Re: IOS-XE Smartport Macro for changing speed/duplex on 802.1x port

Re: DNA Center and 9800 landing WLC

Re: DNA Center and 9800 landing WLC

Re: CISCO 9800 wreless controller not getting the http or https access