Hi all-We just switched over from a T1 line to 50/4 Mbps cable Internet. The speed was fine with the T1, but when we switched over to cable, the download speeds didn't increase. I'm getting 2-3 Mbps up and still only 1.5 Mbps down. I inherited th...
Patrick-That was it! Changing it to auto/auto did the trick. Did another speed test and I'm getting 42-43 Mbps download. Thank you so much for the help. Hopefully this will help someone else who has the same problem and comes across this thread.
Hi!I verified that the netmask is correct. The setting work great when I bypass the Pix. As soon as I put it back through the Pix, it slows way back down.
Hi again Harish-I sent the clear counters command and it went through, but the info in the sh int doesn't look like it was reset. I could be wrong though, so Here it is afterwards:Interface Ethernet0 "outside", is up, line protocol is up Hardware i...
I did see the throuhput number. Here's the sh int if that's what you're asking for. I've also got the complete running config if that will help. Thanks so much for taking a look! I appreciate any help from anyone. I don't want to have to give up...
