Hi Everyone,I have a similar problem, I'm able to connect via VPN client and ping only one host on the remote lan and nothing else. I'm using both split-tunnel and non-split-tunnel, but none has worked. My main objective is to make the remote u...
Hi Harish, Here you go:I-NET-RTR#show runI-NET-RTR#show running-config Building configuration...Current configuration : 7931 bytes!! Last configuration change at 07:54:37 UTC Mon Oct 1 2012! NVRAM config last updated at 07:54:39 UTC Mon Oct 1 2012!ve...
Hi Portu,Thanks for replying. I tried few things over the weekend, here is my scenario:1) I have a Cisco 1941 Router connected to Internet with x.x.x.66 IP, and my LAN users access Internet through this IP2) I have setup x.x.x.67 ip on ASA outside (...
Hey Portu,Thanks for hitting back.Here is the output of the first command:Result of the command: "show capture capin"14 packets captured 1: 21:40:36.200902 192.168.20.1 > 192.168.2.10: icmp: echo request 2: 21:40:46.139076 192.168.20.1 > 192.168....
Hi Everyone,I have a similar problem, I'm able to connect via VPN client and ping only one host on the remote lan and nothing else. I'm using both split-tunnel and non-split-tunnel, but none has worked. My main objective is to make the remote user ...