About Inaki Kortazar

Inaki Kortazar · 08-12-2020

Hi all,We have a 26 2960 switch network with a couple C3750 stacks as CORE ,they are currently running a VTP v2 client/server enviroment,3750 are the servers.Pruning is enable.We want to stop working with VTP because of a new device instalation that ...

Inaki Kortazar · 08-12-2020

Hi all, I have a network with 26 Cisco 2960 and a couple of 3750 stack as the CORE devices, they are in a VTP v2 client/server enviroment, 3750s are the servers.We need to start working without VTP because of a new devices installation, but It looks ...

Inaki Kortazar · 06-09-2020

Hi! I´m trying to connect two Cisco stack through 1 LACP of 4 Ten Gigabit Ethernet fiber ports (2 ports on each device)One stack is made of 3 C3750X-48 devices and the other one is made of 2 SX550Z-16FT. I tried to connect them through a port channel...

Inaki Kortazar · 08-11-2010

Hi All,We have an installation with 20 VLANS distributed via VTP to all the switches we have. We have routing between VLANs enable. So, there is total access between VLANs.But, we would like to restrict access to the managemente VLAN. Using access-li...

Inaki Kortazar · 07-21-2010

Hi all,We are having some issue accesing, from our LAN, to a web server situated on the same internal network through our public address. We are trying to do so, since we use a program with a hyperlink to that web server and, we can use it making dem...

Inaki Kortazar · 12-04-2021

Gracias @manfredcalderon10 veré como puedo hacerlo, por el momento no encuentro la manera.

Inaki Kortazar · 12-02-2021

Hola! Muchas gracias por vuestra ayuda @luis_cordova @Hilda Arteaga @Julio E. Moisa ,disculpad la tardanza en contestar pero he estado fuera de combate unos días. Me parece que el problema principal reside en que no podré enrutar dos redes diferente...

Inaki Kortazar · 08-12-2020

Hello Matt, Thanks for your time, I guess that we can keep our VTP domain.We are going to instal a NAC which is going to commit network authorizations via RADIUS (VLAN / ACL assignment)that´s why we need to get rid of vlana management via VTP. My fir...

Inaki Kortazar · 08-12-2020

Hi Paul,Thank you for your reply,It looks easier to implement vtp mode offThe devices are a WS-C3750X-48 and they run in 12.2(55)SE5 version.C2960 run between 12.2(50)SE5, 15.0(1)SE3, 15.0(2)EX5 versions.I tried in Packet Tracer but the command does ...

Inaki Kortazar · 06-10-2020

Hello Both sides has channel group 11 mode on on their ports ,but the message is new for me..sw-be-034(config-if-range)#channel-group 11 mode on18-Jun-2019 05:41:54 %2SWTRUNK-I-TRNKPORTPARAM: auto-negotiation/adv. capabilities of port te2/0/9 differ ...

Member Since	‎07-22-2008 09:40 AM
Date Last Visited	‎12-13-2021 02:03 AM
Posts	29
Total Helpful Votes Received	15

User Statistics

User Activity

Entire VTP Domain on transparent mode

Setting an entire VTP domain on Transparent mode

Problem with LACP between SX550X and C3750

restricting access between VLANs

Accessing public IP from local network

Re: Activar la comunicación entre dos vlan diferentes.

Re: Activar la comunicación entre dos vlan diferentes.

Re: Entire VTP Domain on transparent mode

Re: Entire VTP Domain on transparent mode

Re: Problem with LACP between SX550X and C3750