Hi,
Please i have an ASA 5545 with 9.2 (3) OS, I need to NAT some traffic to some servers in my LAN.
I have two DMZs (Untrust and DMZ_MPLS) from which users will access to the servers (Inside zone).
I did NAT to the inside server (172.16.1.11 (inside...
Hi, i have a 4900m switch that i ordered with X2-10GB-SR module. But thses module are SC connector. I now need to have an LC transceiver but i dont know with one to order. I saw this one GLC-SX-MM: Gigabit Ethernet SFP, LC connector, and SX transceiv...
Hi All, I have Two ASA5545X with firepower installed, I also have a FireSight to manage both FirePower. My ASAs are in Active/Stanby config and i Need that the firepower also do the same. But when i make failover test with my ASAs, fireSight does not...
Hi All,I have an urgent Issue, i bougth 2 ASAs 5545x with Firepower, both ASAs have Sourcefire inside flash, but only one has the status UP. when I issue show module command, ASA1=======================================================================...
Hi,please can you advise for this kind of error ?Event5400 Authentication failedFailure Reason11014 RADIUS packet contains invalid attribute(s)ResolutionCheck the network device or AAA Client for hardware problems. Also check the network that connect...
Hi,
Nasoud, yes i want that users from MPLS Link who dont have access to Internet can access application. And other users outside the MPLS network can access via Internet.
Ok this is the config i Did:
object network Host_Serveur_web nat (Inside,Untrust) static Host_ext_SAP_webaccess-list WEB_access_IN extended permit object-group WEB_SERVICE any4 object Host_Serveur_webaccess-group WEB_access_IN in interface Untrustob...
