DearsI had cisco MDS 9148S SAN switch , i upgrade the device from 8.4.2 to 9.3.2 but i can see from server side Pathes for storgate are not working could plz advise about that ?Bests
Hello DearsWe are planning to impelment Cisco ISE with 802.1x and we have the following quiestions :1-is it possible to connect ISE with Microsoft AD so the login user for 802.1x is done with AD username/password?2-is 802.1x is working without issue ...
Hello DearsI want to configure nexus switch 9318 to send log to log server for any changes or notification in the systemi did the following but seems it's not working :logging server 10.0.0.2 7 use-vrf mang facility sysloglogging level ethpm 7loggin...
Hello Dears and thnx for reply could we authenticate 802.1x without ISE certification i am need the user just checking by username/password not using any authenication method anyone can help ?
hello dear and thnx for reply , i put that but in syslog side the information like interface up/down and same stuff is not appear and also for login failed as an exmple is also missed
Hello Dearthe diagram is attached which VPC 1 is the main VPC and peer link is build on it , we want to make the green line be anther vpc let say vpc 2 to be backup in case of the main vpc 1 goes down and take in mind there is one layer 3 interface i...
hello dearthe connection is simple we had two FTD nodes going to two Nexus switches each FTD box has two connection to N9K-1 and N9K-2 and for configration : description To Firepower-vPCswitchportswitchport mode trunkspanning-tree port type edge trun...
