wenbin,You could setup a syslog server on a windows box and run Kiwi syslog to do the logging.Kiwi which is now part of SolarWinds a company that has a bunch of tools for doing monitoring of just about any network device.You could use something like ...
Laura,Sounds like you need to add the new VPN pool from 192.168.101.1 - 192.168.101.250 to your Inside_nat0_outbound ACL:Should look like this now both the internal and VPN pool address ranges included:access-list Inside_nat0_outbound extended permit...
Derrick,You could have done an "ipconfig /flushdns" on the workstations and ran the Mircosoft DNS management tool from a workstation or server, clicked on "View" then made sure the "Advanced" option was checked. Under the Cached Entries find your do...
Derrick,On your internal DNS create a zone for your external DNS "domain.com" Then just add any entries that you would like internal users to access, with the appropriate IP addresses. The only issue with this configuration is that if external recor...
Make sure you are not running a vulnerable version of DD-WRT or you may be compromising the security of the site with the ASA 5510Purchasing an ASA 5505 would be a good solution to help mitigate this risk. Cisco puts out regular security advisories ...