davidmoody
Level 1
Level 1
Member since ‎05-21-2004
‎08-18-2017

User Statistics

  • 11 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies

User Activity

I am attemptting to configure a SF500-48p switch to do the followingUse port 1 as VLAN 100, use port 2 as Vlan 200 both of these are untagged Vlans, then use port 3 as a trunk for both the vlans which would be tagged.I am attempting to use both the G...
I am attempting to block all FTP traffic on port 21 from the servers in my network, and only allow FTP from one server to go out.I have created the following ACLaccess-list 101 Permit ip any any access-list 101 Permit 21 1.1.1.1 0.0.0.0 anyaccess-lis...
To allI have a Cisco ASA and have a client that has a NetScreen 5200 and we are seeing issues on the ASA that show the error below %ASA-4-402119: IPSEC: Received an ESP packet (SPI= 0x0C970ED6, sequence number= 0x5B7B) from (Remote End) to (Local End...
I am new to the Ace module world and have configured what I feel is a working configuration for load balancing, as its working, but the question I have is How does one use the GUI interface I have chnaged the www user password but all I see is a scre...
I have attempted to upgrade my 4210 IDS sensos both via the upgrade ftp and upgrade scp from an ftp server as well as useing the IDS as the host and both do not work.When I attempt to use the upgrade scp from the sensor and have the host sensor key s...
Community Statistics
Member Since ‎05-21-2004 08:50 AM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 11