bradummer
Beginner
Beginner
Member since ‎05-02-2012
‎04-11-2018

User Statistics

  • 15 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
5 Replies

User Activity

I have an RV042 with a small office network behind it. The subnet for our LAN is 10.4.20.0/24 with the RV042’s Device IP Address set to 10.4.20.1 and the Subnet Mask of 255.255.255.0. Thus I can go to 10.4.20.1 and get the RV042’s login screen. This ...
While trying to configure my RV042, I "turned on" the DMZ Host functionality (under Setup > DMZ Host) by entering the LAN IP address of one of our machines. I now believe that I don't actually want this on. According to the Help page (and also the ma...
I have a 6 month old RV042 with the newest firmware (v4.2.1.02). Over the weekend I configured the DMZ which after a lot of trial and error, was able to get working. Prior to configuring DMZ, I was able to log in with remote management. However now r...
I'm tryig to put a computer into the DMZ and then access it from computers on the LAN using a local IP address. My reason for doing this is that I'd like my DMZ computer to be a locked down web server (just ports 80 and 443 open to the outside), but ...
I'm trying to set up a RV042 to do the following:1) Block all WAN connections, except for:2) Allow all port 80 connections, and forward to 10.4.20.603) Allow all port 443 connections, and forward to 10.4.20.604) Allow port 22 connections from specifi...
Community Statistics
Member Since ‎05-02-2012 09:12 AM
Date Last Visited ‎04-11-2018 12:18 AM
Posts 15