begad.nashaat
Level 1
Level 1
Member since ‎02-15-2015
‎08-18-2017

User Statistics

  • 30 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
20 Replies
10 Replies
5 Replies

User Activity

I'm connecting two catalyst 3560 switches to each other using trunk port and I'm getting below logs on one of them. Any ideas ???18:43:38: %SW_MATM-4-MACFLAP_NOTIF: Host ac7b.a15b.3c2c in vlan 40 is flapping between port Fa0/1 and port Fa0/718:45:00:...
Dears,  Please check below configuration for my catalyst switch 3560. The hosts in VLAN 30 (10.0.30.5) can't ping hosts in VLAN 50 (10.0.50.5), however the hosts in VLAN 30 can ping interface VLAN 50 (10.0.50.1) and vice verse. please check configura...
Dears,I have configured the following VLANs on my 3560 Cisco switch :VLAN 30VLAN 40VLAN 50InterVlan routing is allowed between them, however I want to configure the switch to let specific host to have access to all VLANs while all other Hosts to only...
I'm setting up a lab switch, 3560 to a DSL router/modem and i cannot seem to get the routing from VLAN100 to the DSL router/ modem to work.int g0/1 is connected to the DSL router/ modemint g0/10 is connect to the client (10.10.100.10) From the 3560, ...
Dears,I'm setting up a lab switch, 3560 to a DSL router/modem and i cannot seem to get the routing from VLAN100 to the DSL router/ modem to work.int g0/1 is connected to the DSL router/ modemint g0/10 is connect to the client (10.10.100.10) From the ...
Community Statistics
Member Since ‎02-15-2015 05:04 AM
Date Last Visited ‎08-18-2017 03:50 AM
Posts 30