Hi, I just setup SPA9000, SPA400 and a couple of SPA942/962 IP phones at my wife's small business. Our setup includes one ITSP line on Line 1 and a PSTN connection through the SPA400 on Line 2. Everything is working as expected except for the AA ...
Thanks,Here are the captures on the lan and also on the wan-side of the router. I noticed that the SDP of the second Invite contains the IP address of the IP phone. I tried enabled the VIA settings on the SPA9000 and also setting the "Ext IP" to t...
Yes the ITSP uses an outbound proxy and I've setup the SPA9000 to use it. If you look at the log file "success call _ no AA.log", this call was made with the SPA9000 contact list set to extension 11. In this case, the audio path success fully comes...
OK. Here are the log files you asked for. The file named "Successfull call_via AA(public IPs).log is for the setup where the SPA9000 and SPA901 phones are on a public IPs. This call was handled successfully by the AA.The other two files show logs ...
Thanks for the reply. Yes, I've tried toggling these settings and the issue still exists. If I bypass the AA, by placing an extension number in the Contact list, the call completes correctly with two-way audio. This issue only appears to occur whe...