About hpatel23

hpatel23 · 04-25-2022

I have a Cisco ISR4451-X/K9. I set up interface GigabitEthernet0/0/1.1, secondary IP address as 10.19.194.1/24. I am connected to two nodes in a mesh connection with one port with IP 10.19.194.50 on first node connected to router and another port on ...

hpatel23 · 04-26-2022

Node 1 and Node 2 are ADVA FSP3000 C Optical device.

hpatel23 · 04-26-2022

@Jon Marshall Next Hop IP is 10.19.193.2

hpatel23 · 04-25-2022

Thanks Jon! Thats what I thought as well. But it has worked before in past as well. And seems like config issue on the router side according to customer. So without setting the gateway on 2nd Node, What are the other options to access that node from...

hpatel23 · 04-25-2022

For a F8 device, there is one port that is connected to a switch. In our case on Node 1 that port is connected to the router with default Gateway set to 10.19.194.1/24 and IP address 10.19.194.50. Also through back plane there are two other ports on ...

hpatel23 · 04-25-2022

There is no acl list or firewall issue that will be blocking the ping.

Member Since	‎04-25-2022 09:22 AM
Date Last Visited	‎04-27-2022 10:01 PM
Posts	11

User Statistics

User Activity

Access different subnet through management

Re: Access subnet not part of the default gateway

Re: Access subnet not part of the default gateway

Re: Access subnet not part of the default gateway

Re: Access subnet not part of the default gateway

Re: Access subnet not part of the default gateway