Hi, I configured DHCP Server on Service-VPN-Interface.Both routers (4451-X, newest 17-version) do VRRP on this Interface and have the same dhcp-config: Edges4451#sh run | s dhcp no ip dhcp use class ip dhcp use vrf remote ip dhcp use hardware-address...
Hi,
SNMP query to admin and context give back sysname admin on both.
snmpwalk -v 2c -c public admin-context-ip sysName
--> gives back "admin"
snmpwalk -v 2c -c public context1-context-ip sysName
-->gives back "admin" but should give back "conte...
Hi,
first of all - i already read the incompatibility guide and various documents about VPC and VSS.
But I keep having problem with:
Connecting a Campus Distribution 6500 VSS (formaly the Core) to 2 Nexus 7000 (7702) (new core).
As the incompatib...
Our fresh ISE 2.4 with Patch 1 installed is not identifying the Radius attributes correctly anymore.Oberving the Authentications coming from a foreign WLC for WPA2/802.1X Guest Wlan show"NAS Port Type" 19 instead of "Wireless - IEEE 802.11"and"Servic...
Hi,as i am from Germany and we are having the non-extended-ASCII character "ß" as an equal of double-S quit often in names appearing,i came across this speciality in ISE Logs:e.g.:tesst.teßter(at)test.com is HEX equal tot e s s t . t...
Like the last comments summarize:
the ACL should be on Application, not on FQDN.generally you FTD should lookup DNS either internally via an internal DNS Server and then the interface you specify is the specific internal interface where the DNS serve...
Hi Axel, i solved it with TAC but didnt test if your solution also works. There is a Technote on this:https://www.cisco.com/c/en/us/support/docs/routers/sd-wan/214145-dhcp-server-does-not-work-on-a-router-ru.html Solution:sequence 11 ...
Hi Hasham,thanks that is right - it works. I first thought it only works direction VPN0-in. But anyway for Port Translation or to use the "extendable" keyword you still need CLI Addon Template,which is annoying, as that are all basics.
Hi, it only works for us with CLI Addon Template.With vManage the configuration is always deployed wrong e.g.: ip nat inside source static 172.16.1.20 45.67.12.3 egress-interface GigabitEthernet0/0/0but it has to be:ip nat inside source static 172.16...
