I have the following config on both my Nexus primary and my Nexus secondary: interface port-channel310description Dell TOR 1switchportswitchport mode trunkswitchport trunk native vlan 599switchport trunk allowed vlan 551-560vpc 310interface port-chan...

If I have two 10Gig SFP setup in a port channel (vPC) from both my Primary Nexus 5k and my Secondary Nexus 5K going back to my core switch which is a 6807 VSS, so a primary and secondary but it's logically one switch. So one port on the Nexus primary...

We have a Nexus 5K setup as a vPC pair.   I can log into the "primary" do a config update and copy run start saves the config. If I log into the Secondary and make a config change, doing a copy run start results in: Sec# copy run start[##############...

I have a 6807 VSS core switch, and connected to that core are 2 IDF switches which are 4506.  The 10Gig ports on the sups of the 4506 are set up as a port channel, one leg goes back to one module on the VSS and the other to the secondary. One 6807-45...