About sajid231088

sajid231088 · 02-06-2023

Hi Experts, Hope you all are doing well. please help me in below. We have two ASA configured in Active/Standby, at present we have single ISP but we are going to have second ISP soon. new topology would be : ISP RTR1 -----> ASA1 ------> Core SW1 ISP...

sajid231088 · 08-04-2021

Hi Team,Hope you all are doing good.please help me in below.let take a example that we have Cisco IPS connected outside interface with Internet router and Inside conneted with Server.As a testing i will attack on the server from outside and i want IP...

sajid231088 · 11-09-2019

Hi All, We have Cisco FPR 9300 deployed in Standalone. We are getting maximum Intrusion events " POP_UNKNOWN_RESP (142:2:1) " Please us me know what event it is and how to eliminate this events RegardsSA.

sajid231088 · 10-24-2019

Hi All, Hope you all are doing well Need your help in finding interface down time.ok i will brief it, Yesterday one of our IPS interface went down due to which reason we dont know, Know business has asked us to share a reason when and why interface w...

sajid231088 · 09-22-2019

Hi all,Hope you all are doing good.Please help me on below.We have two FTD 9300 installed in our setup in active standby. Yesterday there was a failover we want to lnow why failover happend and when. Is it possible to find it from FMC ? If so then ho...

sajid231088 · 02-06-2023

Thanks Karsten, any configuration reference for both ASAs.

sajid231088 · 02-06-2023

Thanks Kasun for your reply. I have two different ISPs and IP address provided is also from different network, In such case do i need SW in between or without switch also it will work

sajid231088 · 12-05-2022

Hi,O had done the configuration 5 years back...Not remember what exactly i did but it was working.Let me check if I had saved it somewhere

sajid231088 · 08-06-2021

Hi Marvin,Thanks for your response.

sajid231088 · 10-24-2019

Hi Mervin, Thanks for your response. Actually in our setup both IPS are standalone no HA. For one instance IPS A would be Active and B would be Standbyand for second instance IPS B would be Active and A would be standby in such case how to find out w...

Member Since	‎01-29-2016 11:04 PM
Date Last Visited	‎05-03-2023 08:01 AM
Posts	45

User Statistics

User Activity

ASA Active standby with dual ISP terminated on two different router

Firepower Trust action

Snort: Re: IMAP and POP preprocessor do not handle TLS

Interface History

FTD Failover

Re: ASA Active standby with dual ISP terminated on two different route

Re: ASA Active standby with dual ISP terminated on two different route

Re: ISE 2.4 Posture using SNMP COA with extreme switches

Re: Firepower Trust action

Re: FTD Failover