About sevaho

sevaho · 05-09-2022

HiI have setup a cisco 2960x 48P switch with 5 linksys LAPAC 2600 access points.PC ----> Linksys LAPAC 2600 Wifi Access Point ----> cisco 2960x ----> modem ---> fiber (1Gbps down and up) At some point when too many devices (20 ish I think) are connec...

sevaho · 05-24-2022

Yes, my problem is solved!

sevaho · 05-12-2022

Hi @Georg Pauwen Tried that already but no luck.What I found out is that the 5 AP's where on the same channel (44) with 80Mhz on 5Ghz. Changed all of em to be on a different channel with 20Mhz on 5Ghz. This might actually be the culprit.GreetingsSeba...

sevaho · 05-11-2022

Hi @Georg Pauwen I tried it but did not work, still internet issues.The conifg now looks like:ip dhcp excluded-address 192.168.0.1 192.168.0.2 ip dhcp excluded-address 192.168.0.1 192.168.0.10 ! ip dhcp pool office network 192.168.0.0 255.255.255.0 ...

sevaho · 05-10-2022

HiI will try this out and let you know in the morning!GreetingsSebastiaan

sevaho · 05-10-2022

Hi @Georg Pauwen Thanks for your interest!did this when internet was choking:wg-switch-0#show interfaces gigabitEthernet 1/0/47 GigabitEthernet1/0/47 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is ac4a.5651.ceaf (b...

Member Since	‎05-09-2022 09:43 AM
Date Last Visited	‎05-25-2022 12:02 AM
Posts	8

User Statistics

User Activity

Cisco 2960x 48P internet choking when a lot connected devices

Re: Cisco 2960x 48P internet choking when a lot connected devices

Re: Cisco 2960x 48P internet choking when a lot connected devices

Re: Cisco 2960x 48P internet choking when a lot connected devices

Re: Cisco 2960x 48P internet choking when a lot connected devices

Re: Cisco 2960x 48P internet choking when a lot connected devices