Hello I am running VPC between 2 Cisco Nexus9k switchesWhen Primary switch is rebooted and comes up (port-channel VPC peer-link comes up) both primary and secondary switches suspend all VLANS Switch1 (was the primary switch) that is being reboote...
Hi,Thanks for your helpThere is no misconfig on keepalive. Here is the config as posted beforeNo lacp suspend-individual helped in our case (Cisco Tech support guy from Ireland suggested this solution)interface port-channel137description LAG-vCCAP2 C...
Hi,Thank you for your responseBelow is the config , could you help what is the misconfig ?ToR1 and ToR2 reachable via mgmt. interfacesToR1:-interface mgmt0speed 100vrf member managementip address 192.168.2.100/24vpc domain 100role priority 10system-p...
Thank youI had to enable below command under VPC VLAN port-channels , when ToR1 (primary) was rebooted this time ToR2 did not suspend VLANs (in LACP fast mode)no lacp graceful-convergenceno lacp suspend-individualRegardsShwetha
steady state :-===================VALL-VALL-H-05-TORSW1#VALL-VALL-H-05-TORSW1# show vpcLegend:(*) - local vPC is down, forwarding via vPC peer-linkvPC domain id : 100Peer status : peer adjacency formed okvPC keep-alive status : peer is aliveConfigura...