About RobertKarsai

RobertKarsai · 05-30-2024

Hi All,Have anybody ever run into a problem in a MAC auth environment, that certain printers or other embedded devices (as they tend to remain silent) just time out from FDB, when they time out from FDB they loose their MAC authentication on the swit...

RobertKarsai · 06-05-2024

Do You happen to know how could I initiate a feature request for this? This is somewhat fishy that basically no embedded systems can be used with CBS350 802.1X because of this missing feature. If a switch supports 802.1X it should have this too.

RobertKarsai · 05-31-2024

Yeah, it was a good idea, thanks, but the CBS350 series has no IPDT. I'm starting to embrace the idea of a duct-tape solution: most or all embedded devices need to be pinged every few minutes so that the replies will keep them connected.

RobertKarsai · 05-31-2024

Just one more note: you are on a 10G interface on the CBS, it would not accept non 1G/10G modules like 100Base-FX compatible modules and they do not support 10/100/1000Base-T modules, simply because supported speeds do not match with the 1G/10G capab...

RobertKarsai · 05-31-2024

Hello,There is no such command (service unsupported-transceiver) on CBS switches and on earlier Cisco Small Business generations. They do support what you plug into them and it usually works well, you can use HP, Huawei, Mikrotik whatever SFP modules...

RobertKarsai · 01-18-2024

OK, not there but here:https://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/350xseries/2_5_9/Release-note/b_tesla-release-2_5_9_54.pdf

Member Since	‎05-24-2022 12:48 AM
Date Last Visited	‎06-11-2024 01:03 AM
Posts	7
Total Helpful Votes Received	1

User Statistics

User Activity

No 'authentication control-direction in' equivalent on CBS350 switch

Re: No 'authentication control-direction in' equivalent on CBS350 swit

Re: No 'authentication control-direction in' equivalent on CBS350 swit

Re: CISCO CBS350-24XS SWITCH - Ambiguous 'service unsupported-transcei

Re: CISCO CBS350-24XS SWITCH - Ambiguous 'service unsupported-transcei

Re: 2.5.9.54 firmware for SG350, SG350X, and SG550X