Hi, We have 2 wan links at branch end to reach the DC. When we are trying to access to DC applications outgoing traffic is going one link and return traffic is taking other link. We want return traffic on same link. Please suggest how we take fix ...

Hi, Branch Router having 2 wan links. Please help on the below requirements. 1. 10.10.0.1 Accessible via Primary Link 2. 10.10.0.2 Accessible via Secondary link 3. If any one link goes down traffic has to shift to other link. I want to changes onl...

HI, When I am checking sh run int gi0/0 duplex is auto, but when checked in sh int gi0/0 duplex is full. Please let me know what is the meaning. #sh run int Gi0/0Building configuration... Current configuration : 243 bytes!interface GigabitEthernet0/...

Hi, the below source IP subnets from DC router, however the same segment already they are using to connect the services with source static NAT. Please help how we can do it. Source IP : 10.6.0.0/16, 10.9.0.0/16 Destination IP: 10.150.156.72 Port 44...

Hi, How to Ping IPv6 from Linux Machine. I have the below MAC address - 2402:9900:311:1128:eed:fe7a:7f2e:4e26 Regards, Deepak