Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About ruben
Stats
Member since
07-28-2005
32
Posts
0
Helpful
0
Solutions
Created by
ruben
in IP Telephony and Phones
in IP Telephony and Phones
10-07-2012
02:19 PM
10-07-2012
02:19 PM
Hi When I don't use VSA all information gets logged nice and readable on the Radius server. However, I'm missing some fields and understand that vsa accounting will give me some of them. Unfortunately when I add the command below to achieve it everything turns out unreadable in the logs on the radius server (looks like some form for encryption takes place). Anyone who knows how to configure it to be readable? radius-server vsa send accounting Ruben
... View more
Labels:
11-11-2010
05:15 PM
Back to "TFTP file not found" now... 000423: *Nov 12 02:11:25.243 gmt: TFTP: Looking for CTLSEP0014A815B89B.tlv 000424: *Nov 12 02:11:25.267 gmt: TFTP: Looking for SEP0014A815B89B.cnf.xml 000425: *Nov 12 02:11:25.267 gmt: TFTP: Opened flash:/its/vrf1/XMLDefault7940.cnf.xml, fd 10, size 1061 for process 90 000426: *Nov 12 02:11:25.283 gmt: TFTP: Finished flash:/its/vrf1/XMLDefault7940.cnf.xml, time 00:00:00 for process 90 000427: *Nov 12 02:11:25.323 gmt: TFTP: Looking for P00306000500.loads 000428: *Nov 12 02:11:25.343 gmt: TFTP: Looking for P00306000500.sbn This is version 6.x (I've tried with 7.x and 8.0x too). Version 5 and below does not include a loads-file, so I assume I can't try those versions. Ruben
... View more
11-11-2010
04:24 PM
I've registrered the phone manually now and done the load commands. Debug output is now: 003188: Nov 12 01:21:16.505 gmt: TFTP: Looking for CTLSEP0014A815B89B.tlv 003189: Nov 12 01:21:16.529 gmt: TFTP: Looking for SEP0014A815B89B.cnf.xml 003190: Nov 12 01:21:16.533 gmt: TFTP: Opened flash:/its/vrf1/XMLDefault7940.cnf.xml, fd 10, size 1061 for process 103 003191: Nov 12 01:21:16.541 gmt: TFTP: Finished flash:/its/vrf1/XMLDefault7940.cnf.xml, time 00:00:00 for process 103 003192: Nov 12 01:21:16.581 gmt: TFTP: Looking for P00308010200.loads 003193: Nov 12 01:21:16.581 gmt: TFTP: Opened flash:/P00308010200.loads, fd 10, size 461 for process 103 003194: Nov 12 01:21:16.589 gmt: TFTP: Finished flash:/P00308010200.loads, time 00:00:00 for process 103 003195: Nov 12 01:21:25.445 gmt: TFTP: Looking for P00308010200.loads 003196: Nov 12 01:21:25.449 gmt: TFTP: Opened flash:/P00308010200.loads, fd 10, size 461 for process 103 003197: Nov 12 01:21:25.449 gmt: TFTP: Finished flash:/P00308010200.loads, time 00:00:00 for process 103 The phone has stopped giving the "TFTP file not found". Instead it now says: "File auth error".
... View more
11-11-2010
04:07 PM
I'll try with the 7940 files first: no tftp-server flash:/phone/7940/P00308010200.bin alias P00308010200.bin no tftp-server flash:/phone/7940/P00308010200.sb2 alias P00308010200.sb2 no tftp-server flash:/phone/7940/P00308010200.loads alias P00308010200.loads telephony-service load 7960-7940 P00308010200.loads LOAD COMMAND ERROR:cnf-file location system is not supported for creating automatic tftp bindings. Please use file location flash | slot0 | tftp OR create tftp bindings manually Do I have to configure this in some way, or tell it that the file is in a sub folder. I tried to specify full path the got limited by too many char's. Output from logging: 002736: Nov 12 01:05:20.365 gmt: TFTP: Looking for CTLSEP0014A815B89B.tlv 002737: Nov 12 01:05:20.385 gmt: TFTP: Looking for SEP0014A815B89B.cnf.xml 002738: Nov 12 01:05:20.417 gmt: TFTP: Looking for SIP0014A815B89B.cnf 002739: Nov 12 01:05:20.441 gmt: TFTP: Looking for MGC0014A815B89B.cnf 002740: Nov 12 01:05:20.461 gmt: TFTP: Looking for XMLDefault.cnf.xml 002741: Nov 12 01:05:20.485 gmt: TFTP: Looking for SIPDefault.cnf 002742: Nov 12 01:05:20.513 gmt: TFTP: Looking for MGCDefault.cnf 002748: Nov 12 01:05:45.074 gmt: TFTP: Looking for CTLSEP0014A815B89B.tlv 002749: Nov 12 01:05:45.098 gmt: TFTP: Looking for SEP0014A815B89B.cnf.xml 002750: Nov 12 01:05:45.126 gmt: TFTP: Looking for SIP0014A815B89B.cnf 002751: Nov 12 01:05:45.150 gmt: TFTP: Looking for MGC0014A815B89B.cnf 002752: Nov 12 01:05:45.174 gmt: TFTP: Looking for XMLDefault.cnf.xml 002753: Nov 12 01:05:45.194 gmt: TFTP: Looking for SIPDefault.cnf 002754: Nov 12 01:05:45.222 gmt: TFTP: Looking for MGCDefault.cnf
... View more
11-11-2010
03:50 PM
Debug output: TFTP: Looking for MGCDefault.cnf TFTP: Looking for SIPDefault.cnf TFTP: Looking for XMLDefault.cnf.xml TFTP: Looking for MGC0014A815B89B.cnf TFTP: Looking for SIP0014A815B89B.cnf TFTP: Looking for SEP0014A815B89B.cnf.xml TFTP: Looking for CTLSEP0014A815B89B.tlv No output for EPHONE (reg) In an attempt to fix this I removed the ephone. Now it's not registrered any more. I assume it will auto-reg when it passes the TFTP error...? Yes, I upgraded from IOS 12.4 to 15 some months ago.
... View more
11-11-2010
03:42 PM
That didn't help. New config: show running-config | sec 7940 tftp-server flash:/phone/7940/P00308010200.bin alias P00308010200.bin tftp-server flash:/phone/7940/P00308010200.sb2 alias P00308010200.sb2 tftp-server flash:/phone/7940/P00308010200.loads alias P00308010200.loads load 7960-7940 P00308010200 I'm running the latest IOS, Version 15.1(2)T2. Do you really mean that I can remove all the tftp-server commands? Do I have to introduce something else instead? Ruben
... View more
11-11-2010
02:56 PM
Hi. We have been running CME for many years without problems. However, lately one of our phones will not boot. I tried a factory reset on it (7940). Then it did this: Configuring VLAN Configuring IP TFTP P00308010200.loads TFTP file not found Now i loops on TFTP file not found. I've checked that the file is there and that tftp-server is in the config. show running-config | sec 7940 tftp-server flash:/phone/7940/P00308010200.bin alias P00308010200.bin tftp-server flash:/phone/7940/P00308010200.sb2 alias P00308010200.sb2 tftp-server flash:/phone/7940/P00308010200.sbn alias P00308010200.sbn tftp-server flash:/phone/7940/P00308010200.loads alias P00308010200 load 7960-7940 P00308010200 It gets an IP from our DHCP server and the Option 150 is (as always) enabled pointing to the Cisco router. I tried reboot one of our 7941 phones and noticed that it said "auth error" but continued after a while and works... I assume this might be a related problem. Anyone that knows what to do? Ruben
... View more
Labels:
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
02-13-2010
04:41 PM
02-13-2010
04:41 PM
I did one last try to upgrade to even newer IOS, ver.15.1-1.XB. Then the webvpn context is impossible to get inservice (whatever hard I try I never get it away from "no inservice"). Doing no change at all else than going back to 12.4(15)T9 again, everything is normal once more... To me it seems like AnyConnect on anything newer than 12.4(15)T9 does not work very well... Is there anyone out there running AnyConnect SSL successfully on the new 15.x versions?
... View more
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
02-13-2010
03:32 AM
02-13-2010
03:32 AM
I tested now to put back the old IOS Version 12.4(15)T9. I reinstalled the same AnyConnect package as I used for IOS 15... and now it works again, no change on firewall or NAT. However I would really like to use IOS v15... so if anyone has a solution for this it would be very welcome...
... View more
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
02-13-2010
01:11 AM
02-13-2010
01:11 AM
Here is running-config. The interfaces in use for SSL is outside interface FastEthernet0/1. The inside network to reach is FastEthernet0/0
... View more
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
02-12-2010
04:20 PM
02-12-2010
04:20 PM
The problem started after I upgraded my 2811 router to IOS 15 (from 12.4xxx). I had to reinstall VPN AnyConnect. Router IP: 192.168.123.1 Connecting to VPN gives me 192.168.123.200 Now I can ping 192.168.123.1, but no more any other IP at the same subnet at all. I have done a diff of the old config and the new one and can't find any difference on the webvpn parts and access-lists/NAT. Any suggestions?
... View more
Labels:
Created by
ruben
in Intrusion Prevention and Detection Systems (IPS - IDS)
in Intrusion Prevention and Detection Systems (IPS - IDS)
05-16-2009
12:20 PM
05-16-2009
12:20 PM
Is it OK that 1831 Signatures by default is retired? I have enabled all signatures, but still there are a lot of undeployed signatures showing up in the Top Threats list. Clicking deploy and selecting the lastes sig-file don't make them deployed. Should all signatures be retired=false? Any tips here? By the way, I have planty of free memory, so that's not a consern. Total Signatures: 2544 Total Enabled Signatures: 2541 Total Retired Signatures: 1831 Total Compiled Signatures: 706 Total Signatures with invalid parameters: 7 Total Obsoleted Signatures: 22
... View more
Labels:
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
05-13-2009
10:47 PM
05-13-2009
10:47 PM
The following registry key was not there, but I created it (along with the string Server2003NegotiateDisable), however no better result. HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows NT\Rpc After that I did allow all traffic for a short period through the firewall with no better result. I have run "outlook /rpcdiag" and see that no rpc prossess connects. So the problem is around rpc. I'm getting short of idéas here... Also I still can't understand why pinging the server wan't respond before 30-60 sec of waiting after VPN connection is established (while pinging all other servers on the same net responds on first attempt).
... View more
Created by
ruben
in VPN and AnyConnect
in VPN and AnyConnect
05-07-2009
11:53 PM
05-07-2009
11:53 PM
Yes, Vista 64-bit
... View more
05-02-2009
10:25 PM
After upgrading to Cisco AnyConnect v2.3.0254 Outlook on the clients will not connect to the Exchange like before. I can RDP and Ping det exchange server, but Outlook won't connect. Even more strange is that after 10-30 min's of "waiting" Outlook suddenly connects and everything works perfect for the rest of the VPN session. I have noticed that pinging the exchange server right away after VPN connects don't get any replay, while pinging the VPN router itself does. If I wait for about 30 seconds and ping the exchange server again it replays. It might get sense for some of you...?
... View more
Labels:
Created by
ruben
in IP Telephony and Phones
10-07-2012
10-07-2012
HiWhen I don't use VSA all information gets logged nice and readable on
the Radius server.However, I...
Created by
ruben
in TelePresence and Video Infrastructure
09-20-2012
09-20-2012
Yes, it gives me all these fiels if I use gw-accounting file. But using
syslog it does not send all ...
Created by
ruben
in TelePresence and Video Infrastructure
09-18-2012
09-18-2012
Hi.I would like to get the cdr accounting messages instantly and syslog
works nice for this. However...
11-11-2010
Back to "TFTP file not found" now...000423: *Nov 12 02:11:25.243 gmt:
TFTP: Looking for CTLSEP0014A8...
11-11-2010
I've registrered the phone manually now and done the load commands.Debug
output is now:003188: Nov 1...
11-11-2010
I'll try with the 7940 files first:no tftp-server
flash:/phone/7940/P00308010200.bin alias P00308010...
11-11-2010
Debug output:TFTP: Looking for MGCDefault.cnfTFTP: Looking for
SIPDefault.cnfTFTP: Looking for XMLDe...
11-11-2010
That didn't help. New config:show running-config | sec 7940tftp-server
flash:/phone/7940/P0030801020...
11-11-2010
Hi.We have been running CME for many years without problems.However,
lately one of our phones will n...
02-13-2010
I did one last try to upgrade to even newer IOS, ver.15.1-1.XB.Then the
webvpn context is impossible...
02-13-2010
I tested now to put back the old IOS Version 12.4(15)T9.I reinstalled
the same AnyConnect package as...
02-13-2010
Here is running-config.The interfaces in use for SSL is outside
interface FastEthernet0/1. The insid...
02-12-2010
The problem started after I upgraded my 2811 router to IOS 15 (from
12.4xxx).I had to reinstall VPN ...
05-16-2009
Is it OK that 1831 Signatures by default is retired? I have enabled all
signatures, but still there ...
Public Statistics
| Date Registered | 07-28-2005 11:40 PM |
| Date Last Visited | 08-18-2017 03:54 AM |
| Total Messages Posted | 32 |
