About gkushnir21

gkushnir21 · 10-08-2012

Hi All,I'm running CUCM 8.0.3 and just ran CDR and CMR reports. CDR reports have dateTimeOrigination field but CMR reports are missing the dateTimeStamp field. Does anyone know the reason why this important field is missing and how to fix CMR repor...

gkushnir21 · 02-02-2012

Hello all, I have a Technical Assurance Call (TAC) with AT&T to provision a PRI line for voice service.The PRI will be connected to a 2921 Voice Gateway (VWIC3-2MFT-T1/E1), which will server as VG for a Call Manager.My question is, as a customer what...

gkushnir21 · 03-16-2011

I have 2 Cisco 6509 MultiLayer Switches. I have no Layer 2 trunk between them. They are connected over a Layer 3 etherchannel.I configured a vlan with HSRP on both switches but HSRP is not working. Do i need a layer 2 trunk betwen the switches in o...

gkushnir21 · 02-18-2011

I have a 6509-E with dual Sup720-3B running hybrid code. CatOS 8.4(4) and IOS 12.2(17d)SXB10 on the MSFC. I need to upgrade the IOS on the MSFC, is there a way to do that without reloading the switch? If I issue a reload command on the MSFC would i...

gkushnir21 · 11-03-2008

I'm running two L3 connection between my core switches. Would this be the right config:interface Port-channel200desc Port channel CoreA to CoreBip address 10.10.200.1 255.255.255.252int GigabitEthernet1/1no ip addresschannel-group 200 mode desirable...

gkushnir21 · 03-16-2011

Thank you all for providing your explanations to me. I fully understand what needs to be done in this caseThanks again!

gkushnir21 · 03-16-2011

I was hoping to avoid creating a layer 2 trunk between the two core switches, but if the only way for HSRP to work is to have a layer 2 connectivity, i will have to creat a trunk.

gkushnir21 · 11-04-2008

Thank you for your help!

gkushnir21 · 08-07-2008

Mark,That worked and forced me to use local username when connecting to the switch through the console port. The problem that i'm running into now that i use local username and password, it doesn't like the enable password that i'm putting in.I get t...

gkushnir21 · 08-05-2008

Mark,That's what i originally planned on doing, but i don't get the login local option under line con 0. I'm assuming it's because of the AAA config that i have.These are the options under con 0:line con 0login ? authentication Authentication para...

Member Since	‎04-06-2007 07:07 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	32

User Statistics

User Activity

CMR reports missing dateTimeStamp field

How to provision PRI line for Voice Service (2921 VG / VWIC3-2MFT-T1/E1)

How to configure HSRP between two Layer3 switches with no trunk between them?

Sup720 IOS Upgrade

How to configure L3 Port Channel between two 6509

Re: How to configure HSRP between two Layer3 switches with no tr

Re: How to configure HSRP between two Layer3 switches with no tr

Re: How to configure L3 Port Channel between two 6509

Re: How to bypass TACACS on console connection

Re: How to bypass TACACS on console connection