Have TMS ver:14.6. We did not have Provisioning previously activated. Have installed the TMSPE_1_4.1. Install is fine, no errors, but we are not able to get it activated!It is greyed out! regards /alf
HiWhen i call in to a 7940 with sw 8.1.(2.0) from a mobile that starts with: 45xx xxxx, the call shows up as:unanswered call:From 45 xx xx xx+47 45xx xx xx When i click dial from the 7940, we get a voice telling "the call could not be...." check cata...
HiHow do i enable it so that if an internal user at DN 1234, want to call 2345, but are entering the full 0 + 8 digit dial string, does not go through the GW.( we are using 4 digit for internal calls, 8 for external + 0 )Some of the internal users ar...
HiOperation Manager keep reporting for one of my H.323 GW's, that it has ExceededMaximumUptime on IF-X.X.X.X 10/75 [Vi1]I cant see what is eventually wrong, and are not able to dig in any further on this. It is not possible to disable polling on this...
HiHave som 7921 wireless on CUCM 6.1.the phones could not call internally between themselves, the call get set up, but when you answer there are no voice!If we call an internal office phone, or an external everything is ok. The same if we dial throug...
HiYes, we did, its the local TMS admin account, and yes, there have been a restart!. Not able to see if there is something in the event log, who could give me a clue.
Hi, and thanks for answering. Well since i have 7940/60's mixed in between a lot of CSS, and my route pattern normally takes care of this, i am not sure how i could solve this for only my 7940/60's.I could not see that making a Calling Party Transfor...
