So just a couple of weeks and with the kind support of the TAC some results, the delay from my last Post is caused by myself not the TAC The SFP Bug CSCuj31712 was updated a couple of times and it is now more specific that it is a 3850 bug. It will b...
No, it can't be a soultion, it's nothing more than a hotfix.I didn't want to blame you with the commands but wanted to document a way to fix for other guys finding this thread I am in the same situation as you are and actually prepare customer equip...
Hi! Regarding to the releasenotes of IOS XE3.3.0SE the restrictioon of C3850-NM-2-10G is incorrect:http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html#wp338296Network Modules •The desc...
Hi!As I have a similar issue at the same time I tested with a pretty old GLC-SX-MM= and it worked for me. but thats not an option as I prepare customer equipment....As a Quick fix i enabled autorecovery:errdisable recovery cause gbic-invaliderrdisabl...
HI!I am Just doing something similar and have exactly the same issue.No matter wich port and combination I use, all GLC-SX-MMD= go into err-disable after insertion on any port (using the NM-2-10G).A reboot seems to work without problems, all Modules ...
