About kod34

kod34 · 06-16-2022

I have this mplsl3vpn architecture that doesn't seem to work.I made two sets of configurations, in the first one I configured a neighbors relationships between PEs of the same client and the ping works in inter sub-AS let's say for example from CE1 t...

kod34 · 06-19-2022

Thanks for your insight, I ended up making the Ps of the first sub in full mesh with the Ps of the second sub for the data plane and the RRs for the control plane, the RRs have a neighborship with the PEs while there is no neighborship between the Ps...

kod34 · 06-17-2022

Hello, thanks for your comment, I tried what you said but unfortunately it didn't work, in IOS XR send-community-ebgp and send-extended-community-ebgp fall under address-family ipv4 unicast config mode but not under address-family vpvn4 unicast mode....

kod34 · 06-16-2022

## CE1hostname CE1interface Loopback0ip address 1.1.1.1 255.255.255.255ip ospf network point-to-pointip ospf 1 area 0!interface GigabitEthernet0/0ip address 111.111.111.1 255.255.255.0ip ospf network point-to-pointip ospf 1 area 0no shut!interface Gi...

Member Since	‎06-16-2022 01:18 PM
Date Last Visited	‎08-08-2022 04:27 AM
Posts	4

User Statistics

User Activity

MPLSL3VPN in a two sub-as confederation and route reflectors (IOS XR).

Re: MPLSL3VPN in a two sub-as confederation and route reflectors (IOS

Re: MPLSL3VPN in a two sub-as confederation and route reflectors (IOS

Re: MPLSL3VPN in a two sub-as confederation and route reflectors (IOS