About one_of_alex1

one_of_alex1 · 02-08-2016

Hello all! I can`t find mistake on my own. Why does ping from PC1 to R2 fail?When i ping from R2 to PC1, ping reaches PC1 and on the way back it losts inside R1.PC1 packet (s:192.168.02 d:77.77.77.78) as it recieves by R1 Fa0/1 (out) according to PBR...

one_of_alex1 · 02-16-2016

You are the best! :)

one_of_alex1 · 02-08-2016

R1 configuration: interface Loopback0 ip address 4.4.4.2 255.255.255.0 no ip redirects ip nat inside no ip virtual-reassembly!interface Ethernet0/1 ip address 192.168.0.1 255.255.255.0 secondary ip address 77.77.77.77 255.255.255.0 no ip redirects i...

one_of_alex1 · 02-08-2016

Thank you Paul, i will try.

one_of_alex1 · 02-08-2016

Boris, thank you for your answer! According to NAT Order of Operations if a packet comes to outside nat interface it should perform NAT outside to inside translation before PBR and routing. It is preferably for me to use R1 fa0/1 interface. And as yo...

Member Since	‎02-08-2016 01:03 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

NAT + PBR question

You are the best! :)

R1 configuration:

Thank you Paul, i will try.

According to http://www.cisco