wsanders1
Level 1
Level 1
Member since ‎01-08-2009
‎08-18-2017

User Statistics

  • 36 Posts
  • 0 Solutions
  • 6 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
10 Replies
5 Replies
20 Replies

User Activity

Our ASA5550 was croaking last night and eventually I figured out it was getting blasted by UDP SIP packets:                                       From IP             To IP1186    09:51:09.670894    58.61.157.139    149.137.1.150    SIP    Request: RE...
We installed two NM-1-T3/E3 cards in our 3845 router today and we've reloaded the router twice.rebooted.We cannot activate one of the cards with the "card" command:border1(config)#card type t3 3border1(config)#card type t3 2Card in slot 2 was removed...
Were we sold the wrong product? We installed 2 NM-1A-T3/E3 cards in our 3845, upgraded to c3845-entservicesk9-mz.124-24.T3.bin, but the interfaces show up as ATMX/0 instead of serialX/0.We need to set up frame relay encapsulation. I can't find ay exa...
I've run out of room for two IOSes on the puny 64MB CF card that came with our 3845. Couldn't find any info on cisco.com about upgrading flash:/, so I have several larger CF cards lying around and I assume they will work after I put them in the route...
We have a fairly large legacy installation of Catalyst 3500s interconnected with 62.5 MMF. Most of the links more than 200m or so have these old Allied Telesyn EX-1002 "range extenders" which are alleged to be able to run up to 2km over MMF without t...
Community Statistics
Member Since ‎01-08-2009 11:07 AM
Date Last Visited ‎08-18-2017 03:54 AM
Posts 36
Helpful Votes Given To