About KKZ

KKZ · 05-25-2023

Hello, I want to know how iBGP manipulates OSPF routes to R2 loopback to go via R4 when the link between R1 and R2 goes down.Here I am establishing iBGP neighborship using loopbacks. I have shut down the fa0/0 interface of R1.

KKZ · 10-01-2024

Hello, Yes got it, in firewall check the source IP of the ping, Is there any destination NAT configured on your router? As the public IP won't get translated to Private IP and get routed to the servers unless NAT is configured.

KKZ · 09-30-2024

which username or password do you want? Default credentials to any device?

KKZ · 09-30-2024

Could you please provide us more details regarding the LAN topology of your network, and how are you checking the connection?

KKZ · 09-30-2024

Hello, So do you want to block the ping to servers from WAN IP or allow the ping?

KKZ · 09-30-2024

As per the network topology, The router's gi0/0/1.60 ip address is 172.16.1.1And in your ACL configuration, you have created the ACE 30 permit ip any any that's why you can ping.What is your WAN IP? 172.16.1.1 or 172.24.60.249

Member Since	‎07-11-2022 09:29 AM
Date Last Visited	‎10-07-2024 12:08 AM
Posts	14
Total Helpful Votes Received	2

User Statistics

User Activity

iBGP neighborship using Loopback

Re: ACL extended not working

Re: Can i get username and password

Re: Cisco Meraki MX250 Keep dropping connection after every 2 hours

Re: ACL extended not working

Re: ACL extended not working