About talha_78_2000

talha_78_2000 · 01-06-2014

Hi I have the following setup CUCM ----Sip Trunk ----Voice GW Router ----Sip Trunk ---- PSTN( SIP Provider)All the Cisco ip phones with SIP and SCCP can dial outside through SIP GW and even cisco ip communicator - ( SIP ) can dial outside only Cisco ...

talha_78_2000 · 08-03-2010

We have three Cisco 7936 Conference station. These phones are working fine just 2 days back all three 7936 stop working, on all 7936 RED led is blinking and blank LCD display. Even after restarting it is giving the same problem right after powering o...

talha_78_2000 · 12-14-2009

Hi, I want to know if the module WS-X6148-GE-45AF is supported for VSS or not. If yes which IOS version i needed.The module is working fine with out VSS but when VSS is configured the module is not getting power form switch.Sh module output is given ...

talha_78_2000 · 08-24-2008

I am very new to b-acd and scripts.Now we have call manager express installed all incomming calls are plar to operator and he is manually forwarding calls to extensions. I need that the caller should receive a prompt " please dial required extension"...

talha_78_2000 · 06-28-2008

Our ip telephony setup was working fine from 1 year . Recently from one month it start giving problems. The External outgoing calls through E1 are sometimes one way - voice calls. We can here the voice but the other cannot here the voice. We did not ...

talha_78_2000 · 01-07-2014

Thanks , The issue is fixed by changing the device pool of CIPC -SCCP to same as SIP trunk Device pool.But the CIPC - SIP is working fine with different device pool then the SIP trunk.

talha_78_2000 · 01-07-2014

sureshsub2 wrote:It seems something wrong with the codec selection. we need to crosscheck the codec selection between CUCM & GW and also the preferred codec between the GW and ITSP.could you please capture the debug ccsip message & debug voice ccapi ...

talha_78_2000 · 01-06-2014

Hi , Thanks for the help. I try both options "Check" and "Uncheck" "Optimize for low bandwidth" but it did not work . Can you explain me this Destn SIP Req Addr:Port : 10.43.1.1:0 --> with CIPC SSCP .Where asDestn SIP Req Addr:Port : 10.43.1.1...

talha_78_2000 · 08-24-2008

No, we do not have Unity express. It is a small setup with about 15-20 ip phones and 8 - FXO lines and we dont any requirement for voice mail, so we dont want to buy CME just for this purpose.Thanks,

talha_78_2000 · 06-30-2008

Hello,I upgrade the IOS but it did not fix the problem. Still we have random one-way calls. After upgrade one of my E1 is not working and showing the status as BLOCKED. We have two E1 with 15 DID and 15 DOD each. I give the preference to other E1 so ...

Member Since	‎06-28-2008 05:11 AM
Date Last Visited	‎12-11-2019 05:24 AM
Posts	12

User Statistics

User Activity

Cisco IP Communicator -SCCP cannot dial Outside

Cisco 7936 Conference station - Red LED blinking and no LCD display after power on

WS-X6148-GE-45AF supported for VSS ?

Help regarding b-acd

One way voice on E1

Re: Cisco IP Communicator -SCCP cannot dial Outside

Re: Cisco IP Communicator -SCCP cannot dial Outside

Cisco IP Communicator -SCCP cannot dial Outside

Re: Help regarding b-acd

Re: One way voice on E1