Hi Got a new datacentre build 2 rtr's and 2 sw's go external for timing -everything else infrastructure wise looks to those rtr's and sw's for timing All units are solid apart from 2 small 3560's that keep dropping sync -Sep 21 15:53:03.966: NTP mes...
Hi All.
I have a design issue - see if anyone can help..
I have a 9504 with separate VRF's per customer, each customer had RFC1918 address space - so can overlap.
I also have another VRF that's used as "common services" out of RIPE ip space. I wa...
Hi
I have a ACE 30 with a VIP listening on 443 the passing traffic out to the rservers also on 443 - no ssl offload.
Is it possible to have a redirect for clients coming in on http to redirect to https?
Any config examples would be handy.
thanks
So if the primary ACE is HOT & the FT standby is in cold state. I found the reason & fixed it now I want to initiate a resync so the standby changes from cold to hot. I know I can put the FT group in the admin context out of service & back inservice...
Thanks - I think part of the issue will be trying to get the 1918 ip's NAT'd inside the VRF before leaking just the NAT'd ip vrf to vrf.
Not convinced that's possible.
Jim - thanks for the fast response.So If I have a context with 4 authgroups & then the customer has another endpoint that requires a new 5th or 6th authgroup whats the way round that? Making another context is very long winded & a waste of resource....
Thanks for the answer - that makes sense.1 thing though - the backup-restore cmd - not one ive seen Ive been through the cli cmd doc http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/command/reference/ACE_cr.pdf cant ...
