About julijan.klancnik

julijan.klancnik · 04-14-2017

Hi there, I had WSA with version 7.7.0-195 and was having troubles with certificates and SHA256/SHA1 as reported in BUG CSCur19653. I decided to upgrade to version 8.8.0-085 (the latest available from upgrade path from version 7.7.0-195). But the err...

julijan.klancnik · 05-12-2016

Hello, I am trying to create ACL on Cisco router which will allow all traffic from inside to internet and only allow specific traffic from internet to inside. This is what I've configured and puted on Router's interface connected to ISP: 10 perm...

julijan.klancnik · 04-18-2016

Hello there, I can not make Static NAT to work in situation: I have 5 servers on my LAN and I would like to create static NAT translations for RDP Access from Outside. This is my code: ip nat inside source static tcp 192.168.2.200 3389 interface Dial...

julijan.klancnik · 04-11-2016

Hello to all, I have problem with not seeing GE1/1/49 and GE1/1/50 ports on Cisco SG 500. I can see GE1/1/51 and 52 which are Fiber ports, but I need 49 and 50 to be operative for Copper use. I Can configure port 1/1/49 and 50 through CLI, but they ...

julijan.klancnik · 02-15-2016

Hello, is there anyone who issued problem like this: we have to ASA devices and L2L tunnel between them. The tunnel is up and running, no errors. We have an ACL that filters traffic from three different Networks. Everything is working but in some mom...

julijan.klancnik · 04-25-2017

Thank you for your response. Meanwhile I've upgraded my appliance to version 10.1.0-204. In this version I do not have this issue anymore and this complies with your post also. Thanks again for you post. Regards, J

julijan.klancnik · 06-05-2016

Helly Tyrone, I added this to global configuration on router: ip inspect name FW dnsip inspect name FW icmp router-trafficip inspect name FW tcp router-trafficip inspect name FW udp router-trafficip inspect name FW smtp then this to my Outside Interf...

julijan.klancnik · 05-13-2016

Thanks, I understand. Your advices were (are) really Helpfull. J

julijan.klancnik · 05-13-2016

I am not sure I get it right. I use public NTP servers and my router is syncing with them. So do I need : access-list 101 permit udp any any eq ntp or not? Thanks,

julijan.klancnik · 05-13-2016

Hello, this is what I've configured: ip inspect name FW dnsip inspect name FW icmp router-trafficip inspect name FW tcp router-trafficip inspect name FW udp router-traffic I've create ACL: access-list 101 permit icmp any anyaccess-list 101 permit tcp...

Member Since	‎02-15-2016 03:49 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	24

User Statistics

User Activity

CSCur19653 - WSA certs being signed SHA1 with SHA256 CA - RSA

ACL on Cisco router - Block traffic from outside, allow all from inside

Static NAT Translation for RDP port

Cisco SG500 combo port Copper activation

ASA 5512 L2L VPN tunnel troubles - No traffic to specific network (short time period)

Thank you for your response.

Helly Tyrone,

Thanks, I understand.

I am not sure I get it right.

Hello,