Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About julijan.klancnik
Stats
Member since
02-15-2016
24
Posts
0
Helpful
0
Solutions
04-25-2017
Thank you for your response. Meanwhile I've upgraded my appliance to
version 10.1.0-204. In this ver...
Created by
julijan.klancnik
in Cisco Bug Discussions
04-14-2017
04-14-2017
Hi there, I had WSA with version 7.7.0-195 and was having troubles with
certificates and SHA256/SHA1...
06-05-2016
Helly Tyrone, I added this to global configuration on router: ip inspect
name FW dnsip inspect name ...
05-13-2016
I am not sure I get it right. I use public NTP servers and my router is
syncing with them. So do I n...
05-13-2016
Hello, this is what I've configured: ip inspect name FW dnsip inspect
name FW icmp router-trafficip ...
05-13-2016
Thank you Sep for all the effert. This sollution with ACL is Quite
complicated. I've tried the sugge...
05-13-2016
I have class C network that I am using for connection to client. Should
I put another ACL on Vlan in...
05-13-2016
o.k. But I do have one static nat translation, which allows me (from my
public IP) to connect to the...
05-12-2016
Hi Seb, 10 permit icmp any any20 permit tcp "my public IP" any eq 338930
permit tcp "my public IP" a...
05-12-2016
I have some static NAT statements for RDP.... just didn't post them... I
Will try with your suggesti...
05-12-2016
This is from: Sh ip NAT statistics Total active translations: 167 (0
static, 167 dynamic; 167 extend...
05-12-2016
Hello Karsten, I also need to allow RDP, SSH from outside (from my
company) to Customer's LAN. Can I...
Public Statistics
| Date Registered | 02-15-2016 03:49 AM |
| Date Last Visited | 08-18-2017 03:54 AM |
| Total Messages Posted | 24 |
.jpg "VIP Advisor"){kind=icon}
