Hello,the option 'Resync fails on FNF' does not seem to work for SPA1x2 in FW 1.2.1 (004).The SPA logs 'Resync failed: file not found' and associates the 'Resync Error Retry Delay' timer, regardless of the option set to No.I tried various combination...

Hello,what does the <SP_Default> option do in detail?My guess is that it is means 'Service Provider default provisioning path' and that it is a value that is not erased after a factory reset. So the device will try to provision itself via this defaul...

Hello,does anyone know a way to easily upgrade on a brandnew SPA122 with shipped FW 1.0.1?The environment has NO options capable DHCP server (only 'simple' DHCP), NOR a TFTP server and NO WAY of accessing the 192.168.15.0/24 network!Available is a PC...

Hi,obviously the switching between bridge and NAT mode, using the IVR code 201# still isn't working in the latest firmware.201 lets you chose between NAT (0) and bridge (1) for the yellow ethernet port - at least on the SPA-2102 and SPA-3102.The SPA1...

Hello,in the new FW 1.2.1 it is possible to enable or disable the reset button.Is it also possible to restrict the button to reset 'user values' only and to leave the 'admin values' intact? Or to distinguish between a network factory reset and a voic...