Natambu,It depends on why your circuits are PARTIAL.  Here are some general guidelines.First, check to see if there are any DCC links down and in the network view, then CTC will be unable to see the end-to-end path and will show a circuit as PARTIAL...

I recommend opening a case with Cisco TAC.They need to look at the symptoms for each of the failures and check for any known issues with the Finisar SFPs.When you open the case, list the exact symptoms for all the failures.  If you opened Service Req...

Kim,Have you tried the Cisco on-line tool called the SNMP Object Navigator?You can use it to translate OID into object name or object name into OID to receive object details.http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=enIf you cannot f...

Don,The optical (SONET, SDH) and data networks are converfing moer and more these days.Getting your Cisco certifications is always a good idea and opens doors for job opportunities. Start with your CCNA, then CCNP and CCIE. Even though your degree i...