Hi,When I open a webpage , NAC login page does not display or hit. I have enabled the login page in CAM, I dont have DNS server in this setup.Folllowing things i have done :- 1, Trunk link to Untrusted Port of CAS allowed only Authentication vl...
Dear Naaustin,thanks for your Mail.This problem solved,the issue was switch limitation and not NAC problem.Iwas using 3550 switch.On Wed, Sep 8, 2010 at 5:33 PM, naaustin <
Dear Faisal, Client is getting ip address and not able to ping default gateway( clientin authentication vlan). There is no DNS server in this scenario, so if Ibrows CAM ip address or CAS ip address, I will receive error message'Internet Explorer ca...
Dear Faisal,I have configured as per your instruction. Im able to configure both interfaces of CAS with same ip address. But still i have problem with login page. please find attached files for your reference.Thanks & Regards,Fahad Salim
Dear faisal, "Enable subnet-based VLAN retag" is unchecked . when i made both interfaces(eth0 and eth1) in same subnet, Cam was not able to reach CAS. So I putthem in different subnet.Thanks & Regards,Fahad Salim.On Sun, Aug 22, 2010 at 10:13 PM, fa...
Dear Faisal,many thanks for your respondsI am getting ip address from DHCP on client (authentication vlan9, access vlan99 and ip address got from dhcp is 10.10.99.11). when we assign same subnet ip address for eth0 and eth1(OOB virtual gatway), we wi...