Member since ‎08-07-2008

User Statistics

  • 393 Posts
  • 39 Solutions
  • 43 Helpful votes Given
  • 440 Helpful votes Received
Recent Badges
1 Accepted Solution
10 Replies
20 Replies
5 Accepted Solution
50 Replies
15 Accepted Solution
5 Replies
100 Helpful Vote
 30 Helpful Vote
300 Helpful Vote

User Activity

Hi AllI have installed a WS-X6708-10GE module into a 6509 chassis running a WS-SUP720-3BXL supervisor.  As per the cisco documentation, if I install this line card without powering down the switch, the DFC card will not be powered up (OIR is not supp...
Hi AllI have just moved away from SPAN to VACL's due to the more granular nature of VACL's, but am missing one major filtering feature that SPAN gave me.  I have 20 interfaces in the VLAN that I am capturing, but I do not want to include the traffic ...
Hi AllI have an FWSM pair (stateful failover configured as active/standby) running 3.1(4) and need to upgrade to 3.2(13).  As always, the powers that be want no down time if possible but I am not sure that the modules can continue to talk failover if...
Hi AllI want to use some of the IOS firewall features on the 2851 but have some questions on CPU impact. I use this device for IPSec termination which also incorporates some NAT. It seems that when NAT is enabled, packets traversing interfaces that...
Hi AllIt has been a while since I have configured a Client to LAN VPN using the Cisco VPN Client on the PC. Can anyone point me in the right direction of where a good document is for the config of a Client to LAN VPN terminating on a 1760 using the ...
Community Statistics
Member Since ‎08-07-2008 02:26 AM
Date Last Visited ‎10-09-2017 01:34 PM
Posts 393
Total Helpful Votes Received 440